Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Turn Signal Switch on the Mahindra Bolero

Model: Mahindra Bolero MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Dashboard

See other generations:
Video tutorial

To replace the turn signal switch on the Mahindra Bolero, start by removing the steering wheel. Pull off the upper horn part of the steering wheel.

Unscrew the steering wheel nut with a socket wrench (make sure the wheels and steering wheel are straight). Use a tool as shown in the video to prevent the steering wheel from coming towards you while pulling it off. Once the steering wheel is removed, take off the plastic around the turn signal switch by unscrewing the screws and disconnecting the connector.

After removing the plastic, unscrew the 4 screws of the turn signal switch with a flathead screwdriver. With the old turn signal switch removed, take the new turn signal switch and insert it in the same position as the old one. Screw in the 4 flathead screws and connect the connector.

After inserting the new turn signal switch, check if the headlights, turn signals, and windshield wipers work, then reassemble the plastic and the steering wheel using the same procedure as for disassembly.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

Mahindra Bolero (2000-2022 / MK 1) The fuse boxes of the Mahindra Bolero are responsible for containing the fuses that regulate the operation of the devices installed on the vehicle: i…
Mahindra Bolero (2021-2026 / MK 2) If you have the new Mahindra Bolero second series (2021-2023) and want to find out where the fuse box is located, just carefully read the following g…
Mahindra Bolero (2021-2026 / MK 2) In this tutorial, you will see how to replace the fuel filter on a Mahindra Bolero, a very simple and quick operation. First, open the hood and locat…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Windscreen Without Damaging the Glass

Removing stickers or tags from your car's glass without damaging the windscreen has always been a problem. Especially if we attach it - as we should - at the top of the windscreen, where the "black dots" are, which is the unshielded part of the windscreen designed for this type of device, whether it be a toll tag, GoPro, cameras, or otherwise. We found this product that seems suitable, specifically designed for this purpose, and it also thoroughly removes dirt, grease, oil, and antifreeze salt from plastic surfaces. You can find it on the ATG website or on Amazon.

Watch the video!


by ScegliAuto

More videos