Do it yourself
| ||||
|
Mahindra Marazzo - Video tutorial
Model: Mahindra Marazzo
MK 1
- Years 2018-2024 In this tutorial, we can see how to remove the spare wheel in the Mahindra Marazzo, so that we can use it in case of a flat tire. First of all, make sure that the handbrake is engaged, then open the trunk door, remove the circular cap using a flat tool, and unscrew the bolt inside the hole using the same key to be used later. Once the wheel is on the ground, detach it from the rope and use it as needed. By following the reverse procedure, we can secure it back in its housing.
Posted on 1 July 2023 by ScegliAuto
Other guides that may interest you
|
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.058
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |