Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Marazzo
  6. : How do you replace the rear brake pads of the Mahindra Marazzo?

Mahindra Marazzo - Video tutorial

Model: Mahindra Marazzo MK 1 - Years 2018-2024
Part: Brake pads
Operation: How do you replace the rear brake pads of the Mahindra Marazzo?

In order to replace the rear brake pads of the Mahindra Marazzo you have to go and lift the car with a jack, so that the corresponding wheel is not in contact with the floor. Once this has been lifted, it will be possible to go and unscrew the bolts that secure it to its hub, so that it is replaced with a new spare part. After the replacement it will be possible to unscrew the screws that fix the brake caliper to the disc, so that it can be removed by removing the pads that are inside. Then it will be possible to insert the new ones by mounting all the components previously removed.


Posted on 16 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos