Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on the Mahindra Xuv500

Model: Mahindra Xuv500 MK 1 - Years 2011-2018
Part: Brake pads

Today, you will learn in this video tutorial how to remove and replace the rear brake pads on the Mahindra Xuv500. First, lift the vehicle at the rear and start removing the wheel; then, unscrew the bolts securing the brake caliper to remove it from the rotor, as shown in the video. At this point, apply pressure to the caliper piston to retract it, then remove the old pads; replace them with new ones, cleaning the caliper of any residual dirt first, and apply the reverse procedure for reassembling the pads!

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on a Mahindra XUV500?
How to Replace the Cabin Filter on a Mahindra XUV500?
Mahindra Xuv500 (2011-2018 / MK 1) In this tutorial, you will see how to replace the cabin filter on a Mahindra XUV500, a very simple and quick operation. First, position yourself in t…
How to Replace the Key Shell of the Mahindra Xuv500?
How to Replace the Key Shell of the Mahindra Xuv500?
Mahindra Xuv500 (2011-2018 / MK 1) To replace the key shell of the Mahindra Xuv500, lift the key by pressing the designated button to leverage it out of its housing. This will allow yo…
Replacing the Battery and Shell of the Mahindra Xuv500 Remote
Replacing the Battery and Shell of the Mahindra Xuv500 Remote
Mahindra Xuv500 (2011-2018 / MK 1) Today's main instructions will show you how to disassemble and replace the battery and shell of the Mahindra Xuv500 key remote. First, take your remo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos