Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Xuv500
    4. : How to replace the Mahindra XUV500 remote control battery?

Mahindra Xuv500 - Video tutorial

Model: Mahindra Xuv500 MK 1 - Years 2011-2018
Part: Key
Operation: How to replace the Mahindra XUV500 remote control battery?

Replacing the remote control battery of the Mahindra XUV500, as we can see in this tutorial, is an extremely simple and inexpensive operation. To do this, we will need a small flat-tip screwdriver and a spare 3V CR2032 battery. First of all we remove the emergency key by holding down the side button, then we pry into the slot indicated with the screwdriver, in order to separate the remote control in two. Having obtained access to the battery, we can extract it and insert the spare one, obviously positioning it in the right direction.


Posted on 27 May 2024 by ScegliAuto



How to replace the battery of the Mahindra XUV500 remote control?
Mahindra Xuv500 (2011-2018 / MK 1) As we can see in this tutorial, replacing the battery of the Mahindra XUV500 remote control is an extremely simple and fast operation. To do this, we
How to replace the Mahindra XUV500 remote control battery?
Mahindra Xuv500 (2011-2018 / MK 1) As we can see in this tutorial, replacing the Mahindra XUV500 remote control battery is a very quick and easy operation. To do this we will only need
How to replace the Mahindra XUV500 remote control battery?
Mahindra Xuv500 (2011-2018 / MK 1) Replacing the remote control battery of the Mahindra XUV500, as we can see in this tutorial, is an extremely simple and fast operation. To do this, w

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos