Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery and Shell of the Mahindra Xuv500 Remote

Model: Mahindra Xuv500 MK 1 - Years 2011-2018
Part: Key

Today's main instructions will show you how to disassemble and replace the battery and shell of the Mahindra Xuv500 key remote. First, take your remote and start by removing the plastic battery cover; remove and replace the battery if necessary (using the same type), inserting it in the correct orientation. At this point, pry open the side slot of the remote to split it into two parts, removing the circuit board and transferring everything to the new key shell, following the video tutorial to the end!

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery on the Mahindra XUV500?
How to Replace the Remote Battery on the Mahindra XUV500?
Mahindra Xuv500 (2011-2018 / MK 1) Replacing the remote battery on the Mahindra XUV500, as shown in this tutorial, is an extremely simple and inexpensive task. You will need a small fl…
How to Replace the Remote Battery for the Mahindra XUV500?
How to Replace the Remote Battery for the Mahindra XUV500?
Mahindra Xuv500 (2011-2018 / MK 1) As you can see in this tutorial, replacing the remote battery for the Mahindra XUV500 is an extremely simple and quick task. For this, you will only …
How to Replace the Remote Battery of the Mahindra XUV500?
How to Replace the Remote Battery of the Mahindra XUV500?
Mahindra Xuv500 (2011-2018 / MK 1) Replacing the remote battery of the Mahindra XUV500, as shown in this tutorial, is an extremely simple and quick task. You won’t need any special too…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos