Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xuv500
  6. : How to replace the battery of the Mahindra XUV500 remote control?

Mahindra Xuv500 - Video tutorial

Model: Mahindra Xuv500 MK 1 - Years 2011-2018
Part: Key
Operation: How to replace the battery of the Mahindra XUV500 remote control?

As we can see in this tutorial, replacing the battery of the Mahindra XUV500 remote control is an extremely simple and fast operation. To do this, we will only need a small flat-tipped screwdriver and a replacement battery of the CR2032 type. First of all, we hold down the side button and extract the emergency key, then we insert the screwdriver into the indicated slot and, by levering, unlock the two halves of the remote control. Once fully opened, we remove the old battery, position the replacement one in the right direction and reassemble everything.


Posted on 12 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos