Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xuv500
  6. : How to replace the battery on the Mahindra Xuv500

Mahindra Xuv500 - Video tutorial

Model: Mahindra Xuv500 MK 1 - Years 2011-2018
Part: Battery
Operation: How to replace the battery on the Mahindra Xuv500

Do we want to proceed in DIY mode to replace the battery on this car model? We read the instructions that are reported below and also take a look at the images of the video to find all the useful information for the correct replacement. The battery is located in the engine compartment on the right side, first we are going to remove the negative pole clamp and then the positive one. Then release the fixing nuts of the upper cross member. Then remove the battery from the engine compartment and replace it with the new one to then connect again first the positive pole and then the negative one and then fix the upper plate again.


Posted on 5 August 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos