Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Thar
    4. : How to start diesel regeneration on Mahindra Thar

Mahindra Thar - Video tutorial

Model: Mahindra Thar MK 1 - Years 2010-2020
Part: Engine
Operation: How to start diesel regeneration on Mahindra Thar

Diesel engines that have a Particulate Filter (also called FAP) need this periodically to be regenerated. This is to avoid dangerous blockages that can cause the motor to overheat with consequent serious breakdowns. When the particulate filter begins its regeneration, we warn it by an insistent operation of the engine fan. This also happens in the Mahindra Thar, and when we hear this warning sign, if we can make a quiet road at 60/70 km / h at about 2500 rpm for about a quarter of an hour, or at least until the fan stops. turns off. If we really do not have this possibility, we must at least keep the engine running until the fan turns off. In fact, stopping a regeneration in the middle is quite harmful.


Posted on 21 September 2022 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos