Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xuv500
  6. : How to replace interior door handle on Mahindra XUV500

Mahindra Xuv500 - Video tutorial

Model: Mahindra Xuv500 MK 1 - Years 2011-2018
Part: Handle
Operation: How to replace interior door handle on Mahindra XUV500

If you need to replace the internal handle of a door on Mahindra XUV500, even if only for aesthetic reasons as it is worn and damaged, just proceed as follows. Assuming that you already have the new spare part, to disassemble the old one you will simply need a flat screwdriver with a tip small enough to be inserted into the slot found in the lower part of the handle. By levering through that slot, again with a certain delicacy, the handle will release. To insert the new one, first position the upper part and then, pressing with the palm of your hand, fit the base.


Posted on 25 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos