Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Bulb on a Renault Master

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Headlight bulb

See other generations:
Video tutorial

This guide shows how to replace the dipped beam bulb in the left headlamp of a third-generation Renault Master. First, open the vehicle's bonnet and remove the rubber cap located at the back of the headlamp, then grasp the bulb holder and turn it a quarter turn counterclockwise to remove it. Once done, disconnect the bulb from its holder and replace it with a new one, then reassemble everything by following the reverse procedure.

The required bulb for this vehicle is H7.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to Replace a Bulb in the Renault Master 4
How to Replace a Bulb in the Renault Master 4
Renault Master (2024-2026 / XDD, MK 4) Discover how to independently replace a bulb in the Renault Master 4. Note that the vehicle used in the referenced video is a Renault Master 2, but t…
How to Change the Dipped Beam Bulb on a Renault Master?
How to Change the Dipped Beam Bulb on a Renault Master?
Renault Master (2010-2023 / MK 3) In this short video tutorial, see how to change the dipped beam bulb on a Renault Master. Start by opening the bonnet and removing the rubber cover l…
How to Replace the Front Headlight Bulb on the Renault Master
How to Replace the Front Headlight Bulb on the Renault Master
Renault Master (2010-2023 / MK 3) Today, you will see the instructions that will allow you to remove and replace the dipped and main beam bulb of the front headlight on the Renault Ma…

How to Reset the Tyre Warning Light on the Hyundai Kona

If you own the new Hyundai Kona and want to know how to correctly perform a manual reset of the tyre warning light, follow this procedure. First, enter the vehicle and reach the driver's seat. Insert the key and turn on the ignition, then scroll through the various screens of the onboard menu until you find the one related to tyre pressures. Next, press and hold the "OK" button and confirm the manual reset of the warning light by selecting the "Set" option.

Watch the video!


by ScegliAuto

More videos