Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Dipped Beam Bulb on a Renault Master?

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Headlight bulb

See other generations:
Video tutorial

In this short video tutorial, see how to change the dipped beam bulb on a Renault Master. Start by opening the bonnet and removing the rubber cover located at the back of the headlamp.

Now, grasp the bulb holder of the dipped beam bulb and turn it slightly anti-clockwise to extract it. Once done, replace the old bulb by simply pulling it out and fit the new one. When repositioning the bulb holder, turn it clockwise and ensure it is secure without any play.

Now, just replace the rubber cover and you will have finished the job.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Replace a Bulb in the Renault Master 4
How to Replace a Bulb in the Renault Master 4
Renault Master (2024-2026 / MK 4, XDD) Discover how to independently replace a bulb in the Renault Master 4. Note that the vehicle used in the referenced video is a Renault Master 2, but t…
How to Replace the Front Headlight Bulb on the Renault Master
How to Replace the Front Headlight Bulb on the Renault Master
Renault Master (2010-2023 / MK 3) Today, you will see the instructions that will allow you to remove and replace the dipped and main beam bulb of the front headlight on the Renault Ma…
Replacing the Dipped Beam Bulb on a Renault Master
Replacing the Dipped Beam Bulb on a Renault Master
Renault Master (2010-2023 / MK 3) This guide shows how to replace the dipped beam bulb in the left headlamp of a third-generation Renault Master. First, open the vehicle's bonnet and …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos