Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Xuv500
    4. : How do you replace the outside door handle on your Mahindra Xuv500?

Mahindra Xuv500 - Video tutorial

Model: Mahindra Xuv500 MK 1 - Years 2011-2018
Part: Handle
Operation: How do you replace the outside door handle on your Mahindra Xuv500?

In order to replace the external handle of the Mahindra Xuv500 it is necessary to completely detach the corresponding door panel: this can be detached by unscrewing the screws located under the door handrail moulding. Once all these screws have been loosened, the panel can be detached by disconnecting the connectors inside. In this way you will have access to the screws that fix the handle from the inside of the door: by levering it from the outside of the door, it will be possible to detach it and replace it with a new one.


Posted on 1 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos