Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xuv500
  6. : How to remove the steering wheel in the Mahindra XUV500?

Mahindra Xuv500 - Video tutorial

Model: Mahindra Xuv500 MK 1 - Years 2011-2018
Part: Steering wheel
Operation: How to remove the steering wheel in the Mahindra XUV500?

In this tutorial we can see how to remove the steering wheel in the Mahindra XUV500, a very simple operation. Before proceeding, we disconnect the negative terminal of the battery as we will necessarily have to remove the airbag. Once this is done, we identify the hole located in the rear right area of the steering wheel, then insert a long screwdriver and release the internal clip. We repeat the operation for the opposite side, release the airbag and disconnect the power connector. At this point we can unscrew the large central nut of the steering wheel and remove the latter from the steering column.


Posted on 5 October 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos