Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Kuv100
  6. : How to replace the wheel with the spare wheel of the Mahindra Kuv100.

Mahindra Kuv100 - Video tutorial

Model: Mahindra Kuv100 MK 1 - Years 2016-2023
Part: Wheel
Operation: How to replace the wheel with the spare wheel of the Mahindra Kuv100.

In this short and simple guide, we will see how to disassemble and replace the wheel with the spare wheel of the Mahindra Kuv100, following the instructions below. First, we open the rear hatch of the trunk and start pulling out the kit necessary for the wheel replacement (including the wheel); then we loosen the wheel bolts with the appropriate key, raising the car with the jack, as shown in the video. At this point, we remove and replace the wheel with the spare one, screwing the bolts by hand and tightening them in a crosswise manner; finally, we reposition everything in the luggage compartment!


Posted on 21 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos