Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Kuv100
    4. : How do you replace the swing arm of the Mahindra Kuv100?

Mahindra Kuv100 - Video tutorial

Model: Mahindra Kuv100 MK 1 - Years 2016-2023
Part: Arm
Operation: How do you replace the swing arm of the Mahindra Kuv100?

To replace the swing arm of the Mahindra Kuv100, it is necessary to lift the car so that the wheel corresponding to the arm to be replaced is not in contact with the ground. Once the wheel has been lifted, the fixing bolts must be loosened to remove it from the hub and access the components behind it. After removal, it will be possible to unscrew the bolts that fix the corresponding arm, removing it from its housing and replacing it with a new spare part; after replacement, the corresponding wheel can be installed.


Posted on 17 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos