Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Kuv100
    4. : How do I remove the Mahindra Kuv100 steering wheel airbag?

Mahindra Kuv100 - Video tutorial

Model: Mahindra Kuv100 MK 1 - Years 2016-2023
Part: Airbags
Operation: How do I remove the Mahindra Kuv100 steering wheel airbag?

In order to remove the Mahindra Kuv100 steering wheel airbag you need to unhook the internal pin that locks the airbag inside its seat. In order to unlock this pin, you need to pry with a screwdriver inside the hole located in the rear part of the steering wheel. By then levering it inside, it will be possible to remove the airbag from inside its seat and disconnect the connector at the rear. Once the old airbag has been removed, it will be possible to connect the new one to the connector, fitting it in its seat.


Posted on 9 May 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos