Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Mahindra KUV100?

Model: Mahindra Kuv100 MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Battery

Video tutorial

To replace the battery in a Mahindra KUV100, open the hood to access the device on the right side of the engine compartment: here, loosen the screws that secure the crossbar and remove it completely. After removing the crossbar, you can loosen the power cables so that the battery can be fully extracted from its housing; once removed, install the new battery by connecting the power cables and ensuring everything functions correctly.


Updated on 12 August 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery in a Mahindra KUV100?
How to Replace the Remote Battery in a Mahindra KUV100?
Mahindra Kuv100 (2016-2023 / MK 1) As seen in this tutorial, replacing the remote battery in a Mahindra KUV100 is a very simple and inexpensive task. To do this, you will need a small …
How to Replace the Remote Battery in the Mahindra KUV100?
How to Replace the Remote Battery in the Mahindra KUV100?
Mahindra Kuv100 (2016-2023 / MK 1) As shown in this tutorial, replacing the remote battery in the Mahindra KUV100 is a very simple and quick task. You will need a small Phillips screwd…
How to Replace the Control Arm on a Mahindra Kuv100
How to Replace the Control Arm on a Mahindra Kuv100
Mahindra Kuv100 (2016-2023 / MK 1) To replace the control arm on a Mahindra Kuv100, lift the vehicle so that the wheel corresponding to the control arm being replaced is not in contact…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos