Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery in a Mahindra KUV100?

Model: Mahindra Kuv100 MK 1 - Years 2016-2023
Part: Key

As seen in this tutorial, replacing the remote battery in a Mahindra KUV100 is a very simple and inexpensive task. To do this, you will need a small Phillips screwdriver, a flathead screwdriver, and a replacement CR2032 battery. First, remove the screw located on the back, then separate the two halves of the remote by prying along the entire perimeter. Once done, take out the old battery and insert the replacement, making sure to respect the orientation. Finally, reassemble everything by following the reverse procedure.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery in the Mahindra KUV100?
How to Replace the Remote Battery in the Mahindra KUV100?
Mahindra Kuv100 (2016-2023 / MK 1) As shown in this tutorial, replacing the remote battery in the Mahindra KUV100 is a very simple and quick task. You will need a small Phillips screwd…
How to Replace the Battery in a Mahindra KUV100?
How to Replace the Battery in a Mahindra KUV100?
Mahindra Kuv100 (2016-2023 / MK 1) To replace the battery in a Mahindra KUV100, open the hood to access the device on the right side of the engine compartment: here, loosen the screws …
How to Replace the Battery in the Mahindra KUV100
How to Replace the Battery in the Mahindra KUV100
Mahindra Kuv100 (2016-2023 / MK 1) In this tutorial, you will see how to replace the battery in the Mahindra KUV100, a very simple and quick operation. First, ensure that the key is no…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos