Do it yourself
| ||||
|
Mahindra Kuv100 - Video tutorial
Model: Mahindra Kuv100
MK 1
- Years 2016-2023 To be able to replace the coolant of the Mahindra Kuv100 you have to go to the inside of the wheel arch of the left front wheel: here you will find the drain plug of the coolant tank, which must be unscrewed. In this way it will be possible to collect the liquid inside a suitably positioned container until it has completely flowed out. After the liquid is finished, it will be possible to close the drain plug and open the hood, so that the new liquid can be inserted inside the special tank.
Posted on 7 May 2024 by ScegliAuto
Other guides that may interest you |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |