Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wheel of the Mahindra Tuv300?

Model: Mahindra Tuv300 MK 1 - Years 2015-2020
Part: Wheel

To replace the rear wheel of the Mahindra Tuv300, open the trunk and lift the rear seat to access the spare tire kit located underneath. Using the jack found inside, lift the vehicle so that the rear wheel is off the ground. Then, remove the cover over the spare tire located on the trunk and loosen the bolts securing it. Once the spare tire is removed, unscrew the bolts holding the rear wheel to take it off and install the spare tire.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel on the Mahindra TUV300?
How to Remove the Rear Door Panel on the Mahindra TUV300?
Mahindra Tuv300 (2015-2020 / MK 1) To remove the rear door panel on the Mahindra TUV300, loosen the screw located in the handle pocket of the door. Next, unscrew the two screws positio…
How to Replace the Remote Battery in a Mahindra TUV300?
How to Replace the Remote Battery in a Mahindra TUV300?
Mahindra Tuv300 (2015-2020 / MK 1) In this tutorial, you will see how to replace the battery in the remote for a Mahindra TUV300. For this simple and quick operation, you will need a r…
How to Reset the Service Light in a Mahindra Tuv300?
How to Reset the Service Light in a Mahindra Tuv300?
Mahindra Tuv300 (2015-2020 / MK 1) The video here shows how to reset the service light, the one shaped like a wrench that appears on the display, in a Mahindra Tuv300, but the same pro…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos