Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Tuv300
  6. : How do I remove the rear door panel of the Mahindra TUV300?

Mahindra Tuv300 - Video tutorial

Model: Mahindra Tuv300 MK 1 - Years 2015-2020
Part: Door panel
Operation: How do I remove the rear door panel of the Mahindra TUV300?

In order to remove the rear door panel of the Mahindra TUV300 it is necessary to loosen the screw located in the seat of the internal door handle. Then you will have to unscrew the two screws positioned in the lower part of the panel and you will also have to remove the molding along the handrail. Under this molding there will be additional fixing screws, which must be loosened in order to detach the panel. When the internal connectors have also been disconnected, it will be possible to position the new panel, connecting and fixing it appropriately.


Posted on 5 June 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos