Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Tuv300
    4. : How to replace the glass in the exterior mirror on the Mahindra Tuv300

Mahindra Tuv300 - Video tutorial

Model: Mahindra Tuv300 MK 1 - Years 2015-2020
Part: Outside rearview mirror
Operation: How to replace the glass in the exterior mirror on the Mahindra Tuv300

Let's see in this short and simple guide the steps that will allow us to disassemble and replace the glass of the Mahindra Tuv300 exterior mirror. First of all, let's move to the side of the vehicle and start levering the sides of the mirror glass to release it from the rear support, using a very thin plastic lever; then we go to install the new mirror glass, making sure that the hooks of the plastic rear support are all intact, as shown in the video. Finally we carry out the adjustment of the mirror!


Posted on 20 May 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos