Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in a Mahindra Tuv300?

Model: Mahindra Tuv300 MK 1 - Years 2015-2020
Part: Service warning light

The video here shows how to reset the service light, the one shaped like a wrench that appears on the display, in a Mahindra Tuv300, but the same procedure can be applied to all vehicles from the Mahindra brand. Before inserting the key into the ignition switch, press the left button located at the bottom of the instrument panel. While holding it down, insert the key and turn it to the ON position to power up the instrument panel. You can release the button as soon as the service light disappears.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light in a Mahindra TUV300?
How to Reset the Service Light in a Mahindra TUV300?
Mahindra Tuv300 (2015-2020 / MK 1) .. In this tutorial, you will learn how to reset the service light in a Mahindra TUV300, a very simple and quick operation that should only.. …
How to Reset the Odometer on Mahindra Tuv300
How to Reset the Odometer on Mahindra Tuv300
Mahindra Tuv300 (2015-2020 / MK 1) This video shows how to reset the odometer on a Mahindra Tuv 300. The process is straightforward and does not require difficult steps. First, get ins…
How to Replace the Rear Wheel of the Mahindra Tuv300?
How to Replace the Rear Wheel of the Mahindra Tuv300?
Mahindra Tuv300 (2015-2020 / MK 1) To replace the rear wheel of the Mahindra Tuv300, open the trunk and lift the rear seat to access the spare tire kit located underneath. Using the ja…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos