Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in a Mahindra TUV300?

Model: Mahindra Tuv300 MK 1 - Years 2015-2020
Part: Service warning light

In this tutorial, you will learn how to reset the service light in a Mahindra TUV300, a very simple and quick operation that should only be done after completing all required scheduled maintenance tasks. First, enter the cabin, then insert the key and turn on the ignition. Next, press and hold the "SET" button located in the center of the dashboard, keep it pressed, and simultaneously restart the ignition. Wait for the warning light depicting a wrench to disappear while still holding the button, then restart the vehicle one last time.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light in a Mahindra Tuv300?
How to Reset the Service Light in a Mahindra Tuv300?
Mahindra Tuv300 (2015-2020 / MK 1) The video here shows how to reset the service light, the one shaped like a wrench that appears on the display, in a Mahindra Tuv300, but the same pro…
Where are the fuses located on the Mahindra TUV300?
Where are the fuses located on the Mahindra TUV300?
Mahindra Tuv300 (2015-2020 / MK 1) The fuses on the Mahindra TUV300 are located inside the only fuse box installed on the vehicle: in this car model, you can find it in the engine comp…
How to Remove the Rear Door Panel on the Mahindra TUV300?
How to Remove the Rear Door Panel on the Mahindra TUV300?
Mahindra Tuv300 (2015-2020 / MK 1) To remove the rear door panel on the Mahindra TUV300, loosen the screw located in the handle pocket of the door. Next, unscrew the two screws positio…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos