Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Tuv300
  6. : How to replace headlight bulbs in Mahindra TUV300?

Mahindra Tuv300 - Video tutorial

Model: Mahindra Tuv300 MK 1 - Years 2015-2020
Part: Headlight bulb
Operation: How to replace headlight bulbs in Mahindra TUV300?

As we can see in this tutorial, changing the headlight bulbs in your Mahindra TUV300 is a very simple and fast operation. First of all, make sure that the key is not inserted in order to operate in complete safety, then open the bonnet and disconnect the connector on the back of the headlight. Then we remove the circular rubber cover and take out the bulb by releasing the relative metal clip. Finally, fit the replacement bulb by following the reverse procedure and avoiding touching it directly with bare hands as any residues can cause premature breakage.


Posted on 18 November 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos