Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Tuv300
  6. : How to replace fog light bulb on Mahindra Tuv300

Mahindra Tuv300 - Video tutorial

Model: Mahindra Tuv300 MK 1 - Years 2015-2020
Part: Headlight bulb
Operation: How to replace fog light bulb on Mahindra Tuv300

If we need to replace the front fog light bulb on this car we can find the instructions in this tutorial. First of all it is necessary to open the bonnet and undo the fastening screws of the front grille. Then proceed to remove the wheel arch fixing screws in such a way as to be able to access the rear part of the headlight. Behind it is the power supply terminal that we should disconnect to then remove the burnt out lamp. Then take the new bulb, being careful not to touch the bulb with your hands, and reposition it in its housing, then reconnect the clamp and finally refit the wheel arch and the front grille.


Posted on 25 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos