Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Thar
  6. : How to replace the front bumper grille on the Mahindra Thar

Mahindra Thar - Video tutorial

Model: Mahindra Thar MK 2 - Years 2020-2024
Part: Grille
Operation: How to replace the front bumper grille on the Mahindra Thar

Today we will see, in this video tutorial, how to remove and replace the front bumper grille of the Mahindra Thar, in simple and quick steps. First we open the bonnet of our car and start unscrewing the fixing screws that we find on the upper part; after which we unscrew the screws located on both sides of the front wheel arches, as shown in the video. At this point we unscrew the additional screws that we find under the front bumper, in order to unhook and remove it; we unscrew the screws of the grill to remove it and replace it with the new one, following the video to the end!


Posted on 14 November 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos