Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper on a Mahindra Xylo?

Model: Mahindra Xylo MK 1 - Years 2009-2019
Part: Front bumper

To replace the front bumper on the Mahindra Xylo, first remove the old one. Start by removing all the mounting screws, both the upper ones (accessible by opening the hood) and the lower ones, as shown in the video. Additionally, you need to remove both the front grille and the front license plate to access more bolts that need to be removed. Once this is done, simply pull off the old bumper by disconnecting the wiring. Finally, install the new bumper by reversing the procedure.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Mahindra Xylo
How to Replace the Headlight Bulb on a Mahindra Xylo
Mahindra Xylo (2009-2019 / MK 1) To replace the headlight bulb on a Mahindra Xylo, open the hood to access the components inside the engine compartment. This will also allow you to r…
How to Replace the Front Brake Pads on a Mahindra Xylo?
How to Replace the Front Brake Pads on a Mahindra Xylo?
Mahindra Xylo (2009-2019 / MK 1) To replace the front brake pads on a Mahindra Xylo, lift the vehicle so that it is off the ground. Then, loosen the bolts that secure the wheel to it…
How to Change the Fuel Filter on a Mahindra Xylo
How to Change the Fuel Filter on a Mahindra Xylo
Mahindra Xylo (2009-2019 / MK 1) In this video, you will learn how to replace the fuel filter on a Mahindra Xylo. The fuel filter is located in the engine's intake line and is design…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos