Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xylo
  6. : How to change the engine oil in the Mahindra Xylo?

Mahindra Xylo - Video tutorial

Model: Mahindra Xylo MK 1 - Years 2009-2019
Part: Engine oil
Operation: How to change the engine oil in the Mahindra Xylo?

The video shows us how to change the engine oil in the Mahindra Xylo. The first thing to do is to eliminate the old oil by placing a large container under the sump and unscrewing the locking pin. While the old oil runs off, we can go and unscrew the filter, paying attention because inevitably some residual oil is present and could fall to the ground. We take the new filter, lubricate it with the engine oil and screw it in its seat, then close the oil pan. We go into the engine compartment and, with the help of a funnel or a craft remedy such as the cut plastic bottle, we put in the new oil.


Posted on 4 September 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos