Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xylo
  6. : How do I replace the Mahindra Xylo headlight bulb?

Mahindra Xylo - Video tutorial

Model: Mahindra Xylo MK 1 - Years 2009-2019
Part: Headlight bulb
Operation: How do I replace the Mahindra Xylo headlight bulb?

In order to replace the Mahindra Xylo headlight bulb, you have to go and open the hood, so that you can have access to the components inside the engine compartment. In this way it will also be possible to have access to the internal part of the lighthouse, where the circular protective cover will be found, which must be removed. After its removal, it will be possible to remove the bulb from inside its housing, disconnecting it from the connector and replacing it with a new spare part. Once the new bulb has been connected, it will be possible to insert it into the headlight, closing everything with the lid.


Posted on 29 October 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos