Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xylo
  6. : How to install the plastic wheel covers on the Mahindra Xylo

Mahindra Xylo - Video tutorial

Model: Mahindra Xylo MK 1 - Years 2009-2019
Part: Wheel
Operation: How to install the plastic wheel covers on the Mahindra Xylo

In this video we show you how to install the plastic wheel covers on the Mahindra Xylo. If you want to replace the wheel covers of your Mahindra Xylo with a more attractive model or simply new, you can order them on the internet making sure that the size is the right one. Once you arrive, all you have to do is unhook the old ones and insert the new ones one at a time. When doing so, make sure you rest the wheel trim on the wheel so that the hole on the tire inflating valve matches exactly. Once in position push with a few taps along the perimeter of the wheel to fit the wheel trim into its seat.


Posted on 28 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos