Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb of the Mahindra XUV300?

Model: Mahindra Xuv300 MK 1 - Years 2019-2026
Part: Headlight bulb

To replace the headlight bulb of the Mahindra XUV300, open the hood to access the components inside the engine compartment: you will need to remove the corresponding circular cover to access the inside of the headlight. This will allow you to disconnect the connector attached to the bulb and remove the bulb from its socket: after removing the old bulb, you can connect the new one by inserting it into the headlight. Then, close the headlight with the corresponding cover.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace a Headlight Bulb on a Mahindra Xuv300
How to Replace a Headlight Bulb on a Mahindra Xuv300
Mahindra Xuv300 (2019-2026 / MK 1) When you have a burnt-out bulb in a front headlight, proceed with the replacement as follows: open the hood and locate the bulb to be replaced. Remov…
Where to Find the Fuse Box in the Mahindra XUV300
Where to Find the Fuse Box in the Mahindra XUV300
Mahindra Xuv300 (2019-2026 / MK 1) If you are looking for the fuse box inside your Mahindra XUV300 but haven't found it yet, don't worry; just follow these instructions carefully. Firs…
How to Change the Key Fob Battery of the Mahindra XUV300
How to Change the Key Fob Battery of the Mahindra XUV300
Mahindra Xuv300 (2019-2026 / MK 1) In this video, you can see how to change the battery of the remote for the Mahindra XUV300: it is a very simple operation because you just need to re…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos