Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Headlight Bulb on a Mahindra Xuv300

Model: Mahindra Xuv300 MK 1 - Years 2019-2026
Part: Headlight bulb

When you have a burnt-out bulb in a front headlight, proceed with the replacement as follows: open the hood and locate the bulb to be replaced. Remove the soft plastic cap located behind the headlight assembly by unscrewing it. Inside, you will find the electrical connector which you need to disconnect. Below it is the retaining clip for the bulb holder. To unlock it, push the clip forward, then you can pull out the bulb holder and disconnect the bulb. Take the new bulb, connect it to the bulb holder, and insert it back into the headlight assembly. Then, reattach the clip and reconnect the electrical connector and the cap.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb of the Mahindra XUV300?
How to Replace the Headlight Bulb of the Mahindra XUV300?
Mahindra Xuv300 (2019-2026 / MK 1) To replace the headlight bulb of the Mahindra XUV300, open the hood to access the components inside the engine compartment: you will need to remove t…
How to Replace the Radiator in the Mahindra Xuv300?
How to Replace the Radiator in the Mahindra Xuv300?
Mahindra Xuv300 (2019-2026 / MK 1) To replace the radiator in the Mahindra Xuv300, open the hood and then loosen the bolts securing the front bumper at its upper part. After loosening …
How to Change the Key Fob Battery of the Mahindra XUV300
How to Change the Key Fob Battery of the Mahindra XUV300
Mahindra Xuv300 (2019-2026 / MK 1) In this video, you can see how to change the battery of the remote for the Mahindra XUV300: it is a very simple operation because you just need to re…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos