Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Tuv300
    4. : How to remove the transponder from the key on the Mahindra Tuv300.

Mahindra Tuv300 - Video tutorial

Model: Mahindra Tuv300 MK 1 - Years 2015-2020
Part: Key
Operation: How to remove the transponder from the key on the Mahindra Tuv300.

If we need to dismantle or replace the transponder in the key of this car model, in the description below we can find the instructions and procedures to follow to carry out the operation correctly. First, we need to have a small screwdriver to unscrew the screw behind the key, then use a pointed object to pry at the junction between the two shells that make up the key. Inside the shell, we will find the transponder that we can remove with a pointed object and then replace it if necessary.


Posted on 31 March 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos