Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The procedure for replacing the exhaust on the Malaguti Spectre 125 involves loosening the screws that secure the exhaust terminal to its housing on the right side of the vehicle near the rear wheel. Once the exhaust has been removed, the connecting clamp between the exhaust and the collector can be widened in order to remove the terminal. The new exhaust can then be inserted and secured to the respective supports, and connected to the collector using the clamp, ensuring that everything is functioning properly.

Posted on 21 November 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you replace the exhaust pipe of the Malaguti Spectre 125?
How do you replace the exhaust pipe of the Malaguti Spectre 125?
Spectre 125 To replace the exhaust pipe of the Malaguti Spectre 125, you need to loosen the screws that secure the exhaust terminal to its housing, on the right …
How do you replace the exhaust pipe of the Malaguti Spectre 125?
How do you replace the exhaust pipe of the Malaguti Spectre 125?
Spectre 125 The replacement of the exhaust installed on the Malaguti Spectre 125 can be carried out by loosening the screws that fix the exhaust terminal to its …
How do you replace the exhaust pipe of the Malaguti Spectre 125?
How do you replace the exhaust pipe of the Malaguti Spectre 125?
Spectre 125 In order to replace the exhaust pipe of the Malaguti Spectre 125, you need to loosen the screws that fix the exhaust terminal to its housing, so that…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos