Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
How to replace the original or cone air filter on a Malaguti Phantom F12 50 scooter? Follow this guide to proceed with the replacement. Position the scooter on the centre stand, then use a screwdriver to remove the screws securing the air filter container. After removing the securing screws, uncover the lid and remove the air filter. Install a new one if damaged or reposition the old one after cleaning it (use an air compressor). Finally, close the air filter container and tighten the screws with the screwdriver.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster from a Malaguti Phantom F12
How to Remove the Instrument Cluster from a Malaguti Phantom F12
Phantom F12 50 Before starting, position your Malaguti Phantom F12 on the central stand. Begin by unscrewing and removing the lower screws that secure the instrumen…
How to disassemble the variator cover of a Malaguti Phantom F12?
How to disassemble the variator cover of a Malaguti Phantom F12?
Phantom F12 50 Good morning, today's goal is to open the variator cover of our Malaguti Phantom F12. Let's start by placing the scooter on the central stand. Then, …
How to Start a Malaguti Phantom F12
How to Start a Malaguti Phantom F12
Phantom F12 50 Before you begin, position your Malaguti Phantom F12 on the centre stand. Start by inserting the key into the ignition switch and turning it fully cl…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos