Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Release the Spare Wheel on a Mercedes Metris Van

Model: Mercedes Mercedes Various
Part: Wheel

Video tutorial

In this tutorial, see how to release the spare wheel on a Mercedes Metris van, a very simple and quick operation, for example, in case of a puncture. First, park the vehicle in a safe location, then open the rear door and retrieve the tools provided.

Next, lift the rear seal, locate the indicated bolt, and using the wrench you will use to remove the wheel along with the appropriate extension, unscrew it until the spare wheel is resting on the ground. Finally, detach the spare wheel from the support and proceed with replacing the punctured wheel.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to Set the Clock on a Mercedes Metris Van
How to Set the Clock on a Mercedes Metris Van
Mercedes Mercedes Various Setting the clock on a Mercedes Metris Van is a straightforward task that can be done independently in a few minutes. First, turn on the vehicle's ig…
How to Replace the Window Switch Panel in a Mercedes Metris Van?
How to Replace the Window Switch Panel in a Mercedes Metris Van?
Mercedes Mercedes Various In this tutorial, you will learn how to replace the window switch panel in a Mercedes Metris van, an extremely simple and quick operation. First, ens…
How to Reset the Oil Service on a Mercedes Metris Van?
How to Reset the Oil Service on a Mercedes Metris Van?
Mercedes Mercedes Various In this tutorial, you will learn how to reset the oil service on a Mercedes Metris van, a very simple and quick operation to perform only after compl…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos