Do it yourself
Frequently asked questions about cars and motorcycles

Where is and how to reach the fuse box of a Mercedes Class A?

Model: Mercedes Classe A W168 - Years 1997-2004
Part: Fuse box

The fuse box of a Mercedes Class A is located on the left side of the dashboard, next to the driver's door. To access it, start by opening the door and looking for a small cover that protects the access to the fuses. This cover is usually snap-on and can be easily removed with your hands, without the need for additional tools. Once the cover is removed, you will have a clear view of the fuse box. Inside, the fuses are neatly arranged, each with a specific function, which can vary from lighting components to infotainment systems. It is always advisable to consult the car manual to exactly locate which fuse to check or replace. If you need to replace a fuse, make sure to use one of the same capacity to avoid electrical problems. After completing your operation, put the cover back in place and close the door.

Posted on 11 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe A (2004-2012 / W169) In a Mercedes-Benz A-Class, the fuses are distributed in three main locations. The first box is located in the engine compartment: open the hood and …
Mercedes Classe A (2012-2018 / W176) To view the fuse diagram for your Mercedes A-Class, simply press play on the video attached to this article. Fuses protect the vehicle's components b…
Mercedes Classe A (2012-2018 / W176) If you have encountered a malfunction in one or more electrical components of your Mercedes A-Class W176 and want to access the engine fuse box, just…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos