Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Roof Railing Bars on a Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Roof rack bars

See other generations:
Video tutorial

Let’s see how to install universal roof railing bars on a Mercedes A-Class. Universal roof railing bars are used on vehicles with and without roof rails (fixed bars secured to the roof of the vehicle).

Install the bar kit as shown in the video with the bars adjusted to the width of the vehicle. Position the brackets at both ends of the roof; once you adjust the width of the anchoring brackets, tighten the pins with the wing nut (if a lock is present) until they are fully secured to the roof rails of the vehicle.

Finally, apply the safety caps on both sides.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Replace the Glow Plugs on a Mercedes A-Class
How to Replace the Glow Plugs on a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. you begin, open the hood of your Mercedes A-Class. Start by removing the exhaust manifold by loosening and taking out the mounting bolts. Next, detach.. …
How to Replace the Serpentine Belt on a Mercedes A-Class
How to Replace the Serpentine Belt on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. and engage the parking brake on your Mercedes A-Class, then lift the car. Begin by loosening the tensioner by simply loosening the corresponding mounting.. …
How to Replace the Windshield Wiper Blades on a Mercedes A-Class?
How to Replace the Windshield Wiper Blades on a Mercedes A-Class?
Mercedes Classe A (2018-2026 / W177) .. the windshield wiper blades on a Mercedes A-Class, lift the wipers so they are not in contact with the windshield. Once lifted, tilt them away from.. …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos