Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. : CLE Coupé

How to reset the tire pressure light in the Mercedes CLE?

Model: Mercedes CLE Coupé MK 1 - Years: 2023, 2024, 2025, 2026
Part: Tire pressure warning light

Video tutorial

In this tutorial, we can see how to reset the tire pressure warning light in the Mercedes CLE, an extremely simple and quick operation, to be carried out only once the correct pressure of each tire has been restored following the instructions in the manual.

First of all, let's go inside the car, then insert the key and turn on the instrument panel.

Next, reach the general menu on the display by pressing the "HOME" button, enter "Service", press the "OK" button and select "Tire Pressure". At this point, all that's left to do is confirm the reset and complete the procedure by restarting the vehicle.


Posted on 1 November 2025 by ScegliAuto


Related tutorials

How to remove the Becker Nav on the 2013 Mercedes CLE Coupe
How to remove the Becker Nav on the 2013 Mercedes CLE Coupe
Mercedes Classe C (2007-2013 / W204) Today we will explain how to remove the Becker Nav from the 2013 Mercedes CLE Coupe in a simple and fast way, but above all independently. To carry o…
How to reset the tire pressure warning light in the Mercedes E-Class?
How to reset the tire pressure warning light in the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) In this tutorial we can see how to reset the tire warning light in the Mercedes E-Class, an extremely simple and quick operation, to be carried out o…
How to reset the tire pressure sensor on the Mercedes C-Class W204
How to reset the tire pressure sensor on the Mercedes C-Class W204
Mercedes Classe C (2007-2013 / W204) In the following guide, we will explain step by step how you can correctly perform the manual reset of the tire pressure indicator on your Mercedes C…

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos