|
Do it yourself
| |||
| ||||
How to reset the service on the Mercedes-Benz Sprinter
Model: Mercedes Sprinter
MK 2, W906
- Years 2006-2018
On the Mercedes Sprinter, the service reset is performed directly from the onboard display. With the vehicle stationary and the engine off, turn the ignition to ON and open the vehicle menu as shown. Enter the Service/ASSYST Plus section, select Maintenance Confirmation or Reset Interval and confirm when prompted; in versions with a central unit, this option can also be accessed from the infotainment system. Once completed, the counters will be updated, and the warning will no longer appear on the main screen. To verify, return to the Service section and check the new deadline. If the procedure is not accepted on the first attempt, repeat the sequence following the order of the buttons shown and ensure that the ignition is set to ON without starting the engine.
Posted on 11 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Mercedes Sprinter
(2006-2018 /
MK 2, W906)
.. see how to reset the service light on a Mercedes Benz Sprinter 313 by following a few simple steps that will allow you to work independently on your vehicle... …
Mercedes Sprinter
(2018-2026 /
MK 3, Br910, Br907)
.. calipers to service mode on a 2019 Mercedes Benz Sprinter by following a few simple steps: The first thing to do is perform maintenance on the vehicle,.. …
Mercedes Sprinter
(2018-2026 /
MK 3, Br910, Br907)
.. To reset the oil light on a 2024 Mercedes-Benz Sprinter, sit in the driver's seat, close the door, and turn the key to ON without starting the.. …
Other guides you may be interested in
|
How to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.109
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
