Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulb on a 2014 Mercedes CLA 250

Model: Mercedes CLA C117, X117 - Years 2013-2019
Part: Tail light bulb

If the brake light bulb on your 2014 Mercedes CLA 250 is malfunctioning and you want to learn how to replace it yourself, follow this step-by-step guide. First, lift the trunk hood, then remove the protective cover located near the headlamp and locate the bulb holder. Next, disconnect the electrical connector and proceed to replace the faulty brake light bulb with a new one. Finally, reassemble both the bulb holder and the protective cover.

Posted on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port on a Mercedes CLA 250
Where to Find the OBD Port on a Mercedes CLA 250
Mercedes CLA (2019-2025 / C118, X118) To gain access to the OBD port of your Mercedes CLA 250 and connect a diagnostic tool, you need to carefully read the following guide and apply it st…
How to disassemble the external rearview mirror of the Mercedes CLA 250
How to disassemble the external rearview mirror of the Mercedes CLA 250
Mercedes CLA (2013-2019 / C117, X117) If one of the external rearview mirrors of your first-generation Mercedes CLA 250 is broken or you simply want to replace it with a new one, then all…
Where to Find the OBD2 Port on the 2021 Mercedes CLA 250 E
Where to Find the OBD2 Port on the 2021 Mercedes CLA 250 E
Mercedes CLA (2019-2025 / C118, X118) To analyze the data from the ECU of your 2021 Mercedes CLA 250 E, you need to know where the OBD2 port is located to connect a compatible diagnostic …

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos