Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on Mercedes A-Class W169

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Door trim panel

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the driver side front door panel of a Mercedes A-Class W169. First, open the front door and gather your Torx wrenches. Next, remove the triangular plastic cover located behind the mirror by prying it off, then take off the grab handle cover and remove the screw underneath with a Torx screwdriver.

Now, remove the side screws of the panel, if present. You can now start to detach the panel: pry on the sides to release it; finally, disconnect the electrical connector at the back of the panel to fully remove it!


Updated on 21 March 2026 by ScegliAuto


Related tutorials

Removing the Door Panel on Mercedes A-Class W169
Removing the Door Panel on Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) Using a small flathead screwdriver, remove the plastic screw cover located in the center armrest, then unscrew the now-exposed Torx screw. Next, remo…
How to Replace the Door Spring on the Mercedes A-Class W169
How to Replace the Door Spring on the Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) .. the lock actuator on the door of the Mercedes A-Class W169. For disassembling the panel, refer to one of our tutorials that specifically cover this topic... …
How to Remove the Left Front Door Panel of a Mercedes A-Class
How to Remove the Left Front Door Panel of a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) Begin by disconnecting the battery terminals located in the engine compartment. Using a screwdriver, remove the screws in the handle (take off the pl…

How to Reset the AdBlue Warning Light on a Nissan Qashqai

Hello everyone! Today, I will explain how to reset the important AdBlue additive warning light on your Nissan Qashqai. Reset via the dashboard menu: turn on the car and ensure the instrument cluster is active. Scroll through the menu until you find the option “Service” or “AdBlue”. Select the “Reset” option and confirm. To top up the AdBlue level, open the tank flap and use the supplied nozzle to refill the AdBlue fluid with the engine off. Once the car is turned off and back on, the warning light should disappear if the refill was successful. Good luck.

Watch the video!


by ScegliAuto

More videos