Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on Mercedes A-Class W169

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Door trim panel

Using a small flathead screwdriver, remove the plastic screw cover located in the center armrest, then unscrew the now-exposed Torx screw. Next, remove the side clip of the door (the one accessible only with the door open). Now, removing the panel is quite simple, although it may take some time: you just need to pry with a flat screwdriver or a plastic wedge between the panel gap and the body, gradually detaching it until fully removed. Once successful, disconnect the internal cables and you're done. Goodbye!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Door Panel on Mercedes A-Class W169
Removing Door Panel on Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) .. the driver side front door panel of a Mercedes A-Class W169. First, open the front door and gather your Torx wrenches. Next, remove the triangular plastic.. …
How to Replace the Door Spring on the Mercedes A-Class W169
How to Replace the Door Spring on the Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) .. the lock actuator on the door of the Mercedes A-Class W169. For disassembling the panel, refer to one of our tutorials that specifically cover this topic... …
How to Remove the Left Front Door Panel of a Mercedes A-Class
How to Remove the Left Front Door Panel of a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) Begin by disconnecting the battery terminals located in the engine compartment. Using a screwdriver, remove the screws in the handle (take off the pl…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos