Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on Mercedes A-Class W169

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Door trim panel

See other generations:
Video tutorial

To remove the door panel, first obtain a plastic trim tool to release the clips that secure the panel to the body without scratching anything. If you don't have this tool, wrap a screwdriver with masking tape or electrical tape.

Next, remove the cover that conceals the handle mounting area to access the screws underneath, which must be unscrewed. Then, remove the cover located at the mirror mounting point by sliding it upward.

Finally, release the clips and pull the panel away enough to disconnect the connectors and the lock cable. Reverse the process for reassembly.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Removing Door Panel on Mercedes A-Class W169
Removing Door Panel on Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) .. the driver side front door panel of a Mercedes A-Class W169. First, open the front door and gather your Torx wrenches. Next, remove the triangular plastic.. …
How to Replace the Door Spring on the Mercedes A-Class W169
How to Replace the Door Spring on the Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) .. the lock actuator on the door of the Mercedes A-Class W169. For disassembling the panel, refer to one of our tutorials that specifically cover this topic... …
How to Remove the Rear Door Lock of the Mercedes A-Class
How to Remove the Rear Door Lock of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) Today's main steps will show you the procedure for removing and replacing the rear door lock of the Mercedes A-Class. First, open the rear door and s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos