Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Your 2018 Mercedes GLA

Model: Mercedes Gla W156, MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

This video will show you how to reset the service light on your 2018 Mercedes GLA. First, locate the instrument panel for the car's warning lights using the arrows on the left side of the steering wheel and press OK. Next, hold down the button depicting a phone for a few seconds, then press the confirmation button (OK) found at both ends of the steering wheel controls.

Using the arrows and the OK button, navigate to 'Assist Plus', then 'Full Service', and finally 'Full Service Configuration'. Confirm by clicking 'Yes' and then 'Confirm', and you will be done.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Indicator on a Mercedes GLA?
How to Reset the Service Indicator on a Mercedes GLA?
Mercedes Gla (2013-2019 / W156, MK 1) Resetting the service indicator on a Mercedes GLA, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure t…
How to reset the Service light on the Mercedes GLA?
How to reset the Service light on the Mercedes GLA?
Mercedes Gla (2013-2019 / W156, MK 1) To reset the Service light on the Mercedes GLA, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, press an…
How to Change the Engine Air Filter of the Mercedes GLA 200D
How to Change the Engine Air Filter of the Mercedes GLA 200D
Mercedes Gla (2013-2019 / W156, MK 1) If it is time to replace the engine air filter of your Mercedes GLA 200D and you want to perform the operation yourself, simply read the following gu…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos