Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Seatbelt on Mercedes C-Class

Model: Mercedes Classe C W203 - Years 2000-2007

Use a plastic wedge to remove the lower side cover, the one that the door rests on when closed. Now, in the same way, remove the panel covering the seatbelt attachment to expose the mounting bolt. Unscrew it using a T45 Torx wrench. Still using the plastic lever, remove the adjacent side cover to the one removed earlier. Remove the pillar seal, then detach it by removing the clips with a flat-head screwdriver. Now unscrew the upper seatbelt bolt with a 17 mm wrench. Unscrew the last lower T45 mounting bolt and the two T30 bolts that secure the bracket.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front seat of a Mercedes C-Class
How to remove the front seat of a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. starting, open the front door of your Mercedes C-Class. Begin by sliding the front seat all the way forward on its tracks. Next, sit in the back seat.. …
Remove the Front Seat from a Mercedes C-Class
Remove the Front Seat from a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. how to remove the front seat from a Mercedes C-Class. Open the door of the Mercedes, and start by unscrewing the bolts for the seat belt located at.. …
Replacing the Seat Belt Tensioner
Replacing the Seat Belt Tensioner
Mercedes Classe C (1993-2000 / W202) If after pulling the seat belt to wear it, it has difficulty retracting and remains practically unrolled, hanging loosely, there is a problem with th…

    Frequently Asked Questions

    • Classe C 2021-2028 - Why isn't the car radio working in a Mercedes C-Class? Read answer
    • Classe C 2007-2013 - How much does the Mercedes C-Class W204 B service cost? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos