Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Door Panel on Mercedes A

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Door trim panel

Want to remove the door panel on a Mercedes A? Let's see how to take off the cover panel. Remove the screws located in the upper lever space of the door opening and the screws in the handle: take out the screws inside it. Remove the window crank, unscrew the remaining screws on the door panel, and detach the retaining clips from it. Pull off the panel and disconnect it from the door (unplug the power wiring and the opening cable). Perform maintenance inside the door once it is removed. After maintenance, simply reinstall the cover panel.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on a Mercedes A-Class
How to Remove the Door Panel on a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) Do you need to remove the door panel on your Mercedes to access the inside? Here’s how to do it. Before starting the disassembly, disconnect the batt…
How to Remove the Left Front Door Panel of a Mercedes A-Class
How to Remove the Left Front Door Panel of a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) Begin by disconnecting the battery terminals located in the engine compartment. Using a screwdriver, remove the screws in the handle (take off the pl…
How to Remove the Rear Door Lock of the Mercedes A-Class
How to Remove the Rear Door Lock of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) Today's main steps will show you the procedure for removing and replacing the rear door lock of the Mercedes A-Class. First, open the rear door and s…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos