Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of a Mercedes C-Class

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Door trim panel

Before you can start, open the rear door of your Mercedes C-Class. Begin by unscrewing and removing all the screws that secure the rear door panel to the door itself. This will free the door panel. At this point, disengage and remove it from its housing, then disconnect the electrical connector and the handle cable. Once you have completed this last step, you will have successfully finished removing the rear door panel of your Mercedes C-Class.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel of a Mercedes C-Class?
How to Remove the Rear Door Panel of a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. you begin, open the rear door of your Mercedes C-Class. Start by unscrewing and removing all the screws securing the rear door panel. Once you have unscrewed.. …
How to Remove the Door Panel on Mercedes C-Class
How to Remove the Door Panel on Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. remove the left rear door panel on a Mercedes C-Class? Let's see how to proceed in this video. Before starting the disassembly, disconnect the battery.. …
How to Replace the Panel on a Mercedes C-Class
How to Replace the Panel on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. Let's see how to remove the rear door panel of a Mercedes C-Class. Remove the screws located in the handle (the.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos